Axis 560 print server driver

We are experiencing problems with printing through an Axis print server from a local Windows 7 64 bits machine.

The prints from Windows R2 server farm works just fine. Both the local prints and terminal server prints runs on the same que on a Windows R2 print server. This is an old printserver and I can see there are some firmware updates available, but since the print works fine from the terminal server farm it should work from the local machine? Hi Geir,. I would like to verify how you added the printer on Windows 7. Is the computer in domain environment? Does the printer show in Devices and Printers?

How about using other printers from the server? Since there are some firmware updates available, please update them first to check the result. Meanwhile, you can download the printer driver manually on Windows 7 from manufacture's site, restart the spool service, perform clean boot and disable security software temporarily for a test.

Verifying the Setup You simply need to print a document from the Macintosh computer to verify communication to the chosen printer. The basic installation can be considered complete if the print test is satisfactory. By enabling binary transfer you reduce printing time, provided that the print job is sent as binary data to the print server.

This is particular true when you are printing large bitmaps. Communication Protocol to transfer print data to the printer. Select this alternative when using Postscript printers. However, by assigning an IP address to your print server, you have access to all of the print server parameters via any standard Web browser or via FTP. Select a network printer driver — any LaserWriter will do. DO NOT use the parameter values from this example when configuring your print server.

You should select values that are appropriate for your printers and network settings. Parameters that you do not want to set should be excluded from the text file. Select a port and continue the installation. Click Finish. In the Install Printer Software window, select the proper Manufacturer and Printer from the driver lists. Choose whether you want to keep the existing driver or replace it.

If you already have the printer's driver installed, you will be asked whether to keep it or replace it. Accept the suggested name or enter a new name for your printer and choose if you want to make it your default printer.

If you associate a printer driver with a printer being installed, the driver is automatically installed on the user's workstation.

If the driver already exists, that driver is overwritten even if it is a newer driver. After installing a printer, it is added to the user's Printer folder. Users can print to the printer by selecting it from any application. Network Print Servers Page A standard Web page displays available printers to the user. Map the next available drive e.

Check that each line in the batch file is executed without failure. Click on iPrint Managemen t on the left pane and select Create Printer.

If not, it may be necessary to restart the NetWare server.